The next-generation JBL 305P MkII compact powered studio monitor makes legendary JBL performance available to every studio. With the revolutionary JBL Image Control Waveguide and refined transducers, JBL 305P MkII offers stunning detail, precise imaging, a wide sweet spot and impressive dynamic range that enhances the critical listening capabilities of any modern workspace. Featuring patented technologies derived from the JBL 7 Series and M2 Master Reference Monitors, and sporting a sleek, modern design, JBL 305P MkII delivers outstanding performance and an enjoyable mix experience at an accessible price.

SPECIFICATIONS
^
LF DRIVER: SIZE 203mm (5″)
HF DRIVER SIZE: 25mm (1″)
HF DRIVER TYPE: Soft dome
CROSSOVER: 1725Hz 4th order acoustic Linkwitz-Riley
OK FOR USE NEAR MAGNETICALLY SENSITIVE EQUIPMENT: Yes
INPUT SENSITIVITY: (-10dBV INPUT) 92dB / 1m
POWER CONFIGURATION: Bi-amplified
HF DRIVER POWER AMP: 41W, Class-D
LF DRIVER POWER AMP: 41W, Class-D
FREQUENCY RESPONSE: (±3dB) 49Hz – 20kHz
FREQUENCY RANGE: (-10dB) 43Hz – 24kHz
LOW FREQUENCY EXTENSION: (-10dB) 43Hz
MAXIMUM CONTINUOUS SPL: 94dB
MAXIMUM PEAK SPL: 108dB
MAXIMUM PEAK INPUT LEVEL: (-10dBV / +4dBu) +6dBV / +20.3dBu
SYSTEM DISTORTION CRITERIA: <10% THD at maximum output with full compressor / limiter engagement
ELECTRICAL DISTORTION CRITERIA: 0.2% THD @ 1kHz / 2.83VRMS output; <1% THD @ 1kHz, full rated output
SIGNAL TO NOISE RATIO: 75dBA (A-Weighted), 70dBr (unweighted), relative to 2.83VRMS output
COVERAGE HORIZONTAL x VERTICAL: 120° x 90°
ANALOG INPUT TYPES: 1 x XLR female, 1 x TRS female, balanced
HF TRIM CONTROL: -2dB, 0dB, +2dB
BOUNDARY EQ LF Shelf: @ 50Hz: -3dB, -1.5dB, 0dB
AC INPUT VOLTAGE: 100 – 240VAC (±10%), 50 / 60Hz
ENCLOSURE TYPE: Ported
ENCLOSURE CONSTRUCTION: 15mm MDF
ENCLOSURE FINISH: Matte black PVC
BAFFLE CONSTRUCTION: Injection-molded structural ABS
CABINET DIMENSIONS: (H x W x D) 298 x 185 x 231 mm (11.75″ x 7.3″ x 9.9″)
NET WEIGHT: 4.73 kg (10.43 lbs)

UPC 691991007705

( Priced As A Pair, Sold In Pairs Only )

Features:

• 150 Watts Continuous Power Handling
• Professional Drivers and Crossover Network
• Included Mounting Bracket
• Transparent and Faithful Sonic Performance
• Magnetically Shielded Transducers
• SonicGuard™ Overload Protection
• Available in Black or White Finishes

Specifications:
Frequency Range (-10 dB): 80 Hz to 20 kHz
Frequency Response (± 3 dB): I00 Hz – 18 kHz
Power Capacity: I50 W
Sensitivity: 87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL: 108 dB continuous, 114 dB peak
Directivity Factor (Q): 6.0
Directivity Index (DI): 7.8
Nominal Impedance: 4 ohms
Crossover Frequency: 4.2 kHz
Overload Protection: Full-range SonicGuard™ power limiting to protect network and transducers
LF Drivers: 135 mm (5.25 in) low frequency loudspeaker
HF Drivers: 19 mm (.75 in) polycarbonate dome tweeter
Input Connectors: Spring-loaded terminals
Enclosure Material: Polypropylene Structural Foam
Finish: Black (C1Pro)
Dimensions: 235 mm x 159 mm x 143 mm (9.3 in x 6.3 in x 5.6 in)
Net Weight (ea.): 1.8 kg (4 lb)
Shipping Weight (pair): 4.6 kg (10 lb)
Included Accessories: Mounting Bracket Assembly
Optional Accessories: MTC-1A ultra-duty mount bracket MTC-8 heavy-duty mounting bracket

UPS 050036903455

Control1 Pro Manual

FEATURES

Components:
8” woofer with woven fiberglass cone
1” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus optional U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
120 Watt power handling (240 Watt program) in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

SPECIFICATIONS
^
Frequency Range:   (-10 dB) 45 Hz to 20 kHz
Frequency Response:   (+/-3 dB) 62Hz – 16 kHz
Power Rating:   240 W Continuous Program (2 hrs), 120 W (480W peak), Continuous Pink Noise (2 hrs), 90 W (360W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage:   27.5 V RMS (2 hrs), 55.0 V peak
Maximum SPL:   112 dB ave. Continuous Pink Noise (118 dB peak)
Sensitivity:  91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle:   100° x 100°
Directivity Factor (Q):   7.3 (averaged 1kHz – 16kHz)
Directivity Index (DI):   8.3dB (averaged 1kHz – 16kHz)
Nominal Impedance:   8 ohms (THRU setting)
Crossover Type:   2nd order low-pass, 1st order high-pass, plus conjugate shaping
Transformer Taps:   70V: 60W, 30W, 15W, 7.5W, 100V: 60W, 30W, 15W
Insertion Loss:  Thru Setting: 8Ω nominal
Recommended Protective:  High-Pass 45 Hz high-pass (24 dB/oct) for 8Ω operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
Low Frequency Driver:   200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver:   25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure Material:   High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille:   Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation:   InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Environmental:   IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Termination:   Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Agency Rating:   ROHS-compliant; Transformer UL Recognized per UL1876
Color:   Black (RAL9004)
Dimensions:   (H x W x D) 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight:   6.8 kg (15.0 lbs)
Shipping Weight :  15.4 kg (34 lbs) pair-packed (for 2 speakers)
Included Accessories:   InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key
Optional Accessories:   MTC-28UB-1 – Yolk-type U-bracket (&-WH), MTC-28WMG-1 – WeatherMax grille with backing (&-WH), MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)

UPC 691991002045

FEATURES

Components:
8” woofer with woven fiberglass cone
1” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware*, plus optional U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
120 Watt power handling (240 Watt program) in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

SPECIFICATIONS
^
Frequency Range:   (-10 dB) 45 Hz to 20 kHz
Frequency Response:   (+/-3 dB) 62Hz – 16 kHz
Power Rating:   240 W Continuous Program (2 hrs), 120 W (480W peak), Continuous Pink Noise (2 hrs), 90 W (360W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage:   27.5 V RMS (2 hrs), 55.0 V peak
Maximum SPL:   112 dB ave. Continuous Pink Noise (118 dB peak)
Sensitivity:  91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle:   100° x 100°
Directivity Factor (Q):   7.3 (averaged 1kHz – 16kHz)
Directivity Index (DI):   8.3dB (averaged 1kHz – 16kHz)
Nominal Impedance:   8 ohms (THRU setting)
Crossover Type:   2nd order low-pass, 1st order high-pass, plus conjugate shaping
Transformer Taps:   70V: 60W, 30W, 15W, 7.5W, 100V: 60W, 30W, 15W
Insertion Loss:  Thru Setting: 8Ω nominal
Recommended Protective:  High-Pass 45 Hz high-pass (24 dB/oct) for 8Ω operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
Low Frequency Driver:   200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
High Frequency Driver:   25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure Material:   High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille:   Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation:   InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Environmental:   IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Termination:   Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Agency Rating:   ROHS-compliant; Transformer UL Recognized per UL1876
Color:   White
Dimensions:   (H x W x D) 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight:   6.8 kg (15.0 lbs)
Shipping Weight :  15.4 kg (34 lbs) pair-packed (for 2 speakers)
Included Accessories:   InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key
Optional Accessories:   MTC-28UB-1 – Yolk-type U-bracket (&-WH), MTC-28WMG-1 – WeatherMax grille with backing (&-WH), MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)

UPC 691991002052

Features:

• Extended bandwidth, extremely smooth frequency response.
• 110° x 85° HF coverage, rotatable horn.
• 110 W transformer for 70 V or 100 V lines, with 8 W thru.
• SonicGuard™ overload protection.
• 200 mm (8 in) Kevlar cone woofer,
  25 mm (1 in) titanium diaphragm compression driver.
• Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
  optional U-bracket.
• Sealed input panel cover and screwdown input terminals.

Specifications:
Frequency Range: 37 Hz –18 kHz (-10 dB)
Power Capacity: 300 W Continuous Program Power; 150 W Continuous Pink Noise
Transformer Taps: 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W,
Thru Position: 8 ohms nominal
Frequency Response: 45 Hz – 18 kHz ( ± 3 dB)
Maximum SPL @ 1m: Short-Term: 120 dB; Long-Term: 114 dB
Nominal Sensitivity: 90 dB (2.83V / 1m)
Nominal Coverage Angle: 110° H x 85° V, rotatable
Directivity Factor (Q): 7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.6 dB, averaged 500 Hz to 16 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.3 ohms @ 230 Hz
Crossover Network: 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Low Frequency: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
High Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure Material: High impact polystyrene
Grille: Thermoset composite coated steel, WeatherMax multi-layer foam
Overload Protection: Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
Environmental: IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Terminations: Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency Rating: Transformer is listed per UL1876
Colors: Black or white (-WH)
Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net Weight (ea): 12.2 kg (26.8 lb.)
Shipping Weight (ea): 14.0 kg (30.8 lb.)
Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
Optional Accessories: MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket

UPC 050036903394

Control 29AV1 Data Sheet

Features:
Purposeful Product Design
JBL Waveguide Technology
Bluetooth Integration (master volume and EQ control)

Specifications:
System Type: Self powered 10”, two-way, bass-reflex
Max SPL Output: 124 dB
Freq. Range (-10 dB): 52 Hz – 20 kHz
Freq. Response (±3 dB): 60 Hz – 20 kHz
Coverage Pattern: 110° x 60°
Amplifier Design: Class D
Power Rating: 1000W Peak (700W LF + 300W HF), 500W Continuous (350W LF + 150W HF)
Dimensions (mm) (H x W x D) (in): 558 x 322 x 295 21.968 x 12.677 x 11.614
Net Weight: 11.79 kg (26 lbs)

EON610 Data Sheet

Features:

• Purposeful Product Design
• JBL Waveguide Technology
• Bluetooth Integration (master volume and EQ control)

Specifications:
System Type: Self powered 12″, two-way, bass-reflex
Max SPL Output: 126 dB
Freq. Range (-10 dB): 48 Hz – 20 kHz
Freq. Response (±3 dB): 57 Hz – 20 kHz
Coverage Pattern: 100° x 60°
Amplifier Design: Class D
Power Rating: 1000W Peak (700W LF + 300W HF), 500W Continuous (350W LF + 150W HF)
Dimensions (mm) (H x W x D) (in): 664 x 380 x 316 26.14 x 14.96 x 12.44
Net Weight: 14.96 kg (33 lbs)

EON612 Data Sheet

Features:

• Enclosure designs have been optimized for ideal acoustic resonance taking advantage of injection molding techniques and mechanical shaping of the enclosures.
• JBL Waveguide Technology
• Bluetooth integration (master volume and EQ control)

Specifications:
System Type: Self powered 15″, two-way, bass-reflex
Max SPL Output: 127 dB
Freq. Range (-10 dB): 39 Hz – 20 kHz
Freq. Response (±3 dB): 50 Hz – 20 kHz
Coverage Pattern: 90° x 60°
Amplifier Design: Class D
Power Rating: 1000W Peak (700W LF + 300W HF), 500W Continuous (350W LF + 150W HF)
Dimensions (H x W x D): 707 x 439 x 365 (mm) 27.8 x 17.3 x 14.4 (in)
Net Weight: 17.69 kg (39 lbs)

EON615 Data Sheet

Features:

• JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes frequency response and delivers “coherent summation” in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles are used.
• Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.

Specifications:
Power Rating: 250 W / 1000 W
Frequency Range (-10 dB): 60 Hz – 20 kHz
Frequency Response (±3 dB): 80 Hz – 18 kHz
Sensitivity (@1m): 98 dB SPL (1w/1m)
Nominal Impedance: 8 ohms
Recommended Amplifier Power: 250 W to 500 W into 8 ohms
Maximum SPL: 128 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 2.1 kHz
Dimensions (H x W x D): 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)
Weight: 19.5 kg (43 lb)
High Frequency Driver: JBL 2414H-C , 1″ exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver: JBL M112-8
Input Connectors: Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

Features:

• JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles are used.
• Attractive 18-gauge perforated, steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage.

Specifications:
Power Rating: 250 W / 1000W
Frequency Range (-10 dB): 41 Hz – 18 kHz
Frequency Response (±3 dB): 59 Hz – 13 kHz
Sensitivity (@1m): 99 dB SPL (1w/1m)
Nominal Impedance: 8 ohms
Recommended Amplifier Power: 250 W to 500 W into 8 ohms
Maximum SPL: 129 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 2.2 kHz
Dimensions (H x W x D): 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in)
Weight: 27.4 kg (60.5 lb)
High Frequency Driver: JBL 2414H-C , 1″ exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver: JBL M115-8A
Input Connectors: Neutrik® Speakon® NL-4 (x1); .25in TS phone jack (x1); parallel

Features:

• JBL Patented Slip Stream™ Port
  This patented JBL port design works in concert with the LSR310S low frequency driver for deep, dynamic bass response at all playback levels. The double-flared shape of the port is precisely calculated to optimize low-frequency extension.
• XLF Extended Low Frequency Setting
  A JBL first, the XLF setting activates a specially-engineered tuning that emulates the ample bass tuning used in today’s dance clubs. When producing a dance track, the XLF setting will inspire you and bring a bit of the club to your control from. For inspiration to the max, position the LSR310S in the nearest corner of your room and activate the XLF setting.
• Custom 10″ Down-Firing High Excursion Low Frequency Driver
  JBL Transducers are legendary for their performance. The custom-designed driver in the LSR310S exemplifies JBL engineering prowess, delivering deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure.
• Professional Balanced Inputs and Outputs
  with balanced XLR and 1/4″ inputs and XLR outpus you can add the LSR310S to any studio monitor system to extend its low frequency performance or use it as the “.1” LFE Channel in a surround sound system.
• Selectable Input Sensitivity
  The -10dBV/+4 dBu sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload.
• Three Crossover Settings
  The 80 Hz setting is recommended for use with the LSR305, LSR308 or any studio monitors. The External setting allows use of an outboard crossover.
• Volume Control
  Simple and effective, the LSR310S volume control has detents that make it easy to balance the LSR310S in your studio monitor system

Specifications:
Driver: 250mm (10-inch) High-Excursion, Down-Firing
Low Frequency Extension: 27 Hz
Max Peak SPL: 113 dB
Amplifier Power: 200 W CLass D
Crossover Settings: 80 Hz, XLF, External
Inputs: 2 x XLR, 2 x TRS Balanced
Outputs: 2 x XLR
Maximum Peak Input Level: +20.3 dBu
AC Voltage: 100-240 VAC +/- 10% 50/60 Hz
Dimensions: (HxWxD) 448 mm x 381 mm x 398 mm (17.65 in x 15 in x 15.65 in)
Weight: 15.6 kg / 34.3 lbs

Features:

• 90° x 50° coverage
• Dual-angle pole socket for applications requiring tripod mounting
• Heavy Duty 16 gauge protective screen backed steel grille
• Tough DuraFlex™ enclosure finish
• SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.

Applications:

• Reinforcement of music and speech in entertainment, live or pre-recorded applications
• High-performance satellite speaker for use with subwoofers

Specifications:
Frequency Range (-10 dB): 55 Hz – 19 kHz
Frequency Response (+3 dB): 66 Hz – 16 kHz
Coverage Pattern: 90° x 50° nominal
System Sensitivity: 98 dB SPL (1w@1m)
Power Rating, Pink Noise: 300 W / 600 W / 1200 W
(Continuous/Program/Peak)
Rated Maximum SPL: 122 dB SPL cont. (129 dB SPL peak)
Nominal Impedance: 8 ohms
Dimensions (H x W x D): 650 mm x 429 mm x 457 mm (25.6″ x 16.9″ x 18″)
Net Weight: 21 kg (46 lbs.)

JBL PRX415M Data Sheet

Features:

• Tough DuraFlexT finish enclosure
• Heavy Duty 16 gauge protective screen backed steel grille

Specifications:
Frequency Range: 35 Hz – 250 Hz
Frequency Response: 52 Hz – 120 Hz
System Sensitivity: 95 dB SPL (1w@1m)
Power Rating, Pink Noise: 800 W / 1600 W / 3200 W  (Continuous/Program/Peak)
Rated Maximum SPL: 130 dB SPL peak
Nominal Impedance: 8 ohms
Dimensions (H x W x D): 678 mm x 536 mm x 615 mm (26.7″ x 21.1″ x 24.2″)
Net Weight: 36 kg (79 lbs.)

35mm diameter

60 inch length

Black speaker pole designed to elevate a speaker above a subwoofer.