Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50

Submersible

DD coil type

15 inches in diameter

Fitted skid plate included

Large ground coverage

Still sensitive to small targets

Part#. 3011-0315

The standard coil supplied with the X-TERRA 305, 505 and 705. Good depth, target separation and pinpointing accuracy.

Features:

Model: 3001-0098

Frequency: 7.5kHz

Waterproof Shape: Concentric

UPC 811493011912

The EQX 15 coil weighs 660g with the included protective skid plate, bringing total weight of the EQUINOX detector to 1.49kg with the EQX 15 attached.

Perfect for hunting sandbars for gold nuggets!

Part# 3011-0335

UPC 811493016894

The EQX 06 coil weighs 300g with the included protective skidplate, bringing total weight of the EQUINOX detector to 1.13kg with the EQX 06 attached.

Perfect for hunting bedrock cracks for gold nuggets!

Part# 3011-0333

UPC 811493016870

With the added functionality of Gold Mode, High Frequency 20/40 Hz., Wireless audio accessories and Advanced settings, the EQUINOX 800 offers extra versatility.

Features:

Simultaneous Multi-Frequency: True intelligent Simultaneous Multi-Frequency for maximum performance, plus a wide range of single frequencies.

8 Custom Search Profiles: Each Detect Mode features 2 custom Search Profiles so you can save your favourite settings in each mode.

Waterproof Design: EQUINOX is fully submersible, ideal for detecting at the beach and in rivers, streams and lakes. (3m / 10-feet)

Fast & Accurate Target ID: Fast recovery speed with accurate Target ID ensures you won’t miss any valuable targets amongst the trash.

Sleek & Lightweight: Rugged and lightweight construction allows you to enjoy long detecting sessions in any environment.

Advanced Settings: Gain even more control of your detector audio with Advanced Settings; you decide how much target information you hear.

High-Speed Wireless Audio: Experience ultra-fast wireless audio with the WM 08, or use fast aptX™ Low Latency / Bluetooth headphones.

Gold Detecting Mode: Gold Mode operates the high single frequencies of either 20 kHz or 40 kHz to detect gold nuggets in mineralised soils.

Using the EQUINOX 800 user interface, you can:

Change the Detect Mode, Frequency and Sensitivity on the go.
Create your own notch discrimination patterns to ignore unwanted targets.
Activate All-Metal mode to temporarily disable the current discrimination pattern.
Activate Pinpoint mode to zero-in on a promising target so that you know exactly where to dig.
Adjust an array of essential and advanced detecting functions including Noise Cancel, Ground Balance, Volume Adjust, Threshold Level, Target Tone, Accept / Reject and Recovery Speed.
Customise Advanced Settings to change the way detections are heard, by selecting the number, pitch, and volume of your detection signals.
View the status of your battery and wireless audio device connections.

Specifications
Detect Modes: Park | Beach | Field | Gold
Custom Search Profiles: 8 (2 per Detect Mode)
User Profile Button: Yes
Operating Frequencies (kHz): Multi, 5, 10, 15, 20, 40
Noise Cancel: Auto | Manual (-9 to 9)
Ground Balance: Auto | Manual
Sensitivity: 1–25
Target Volume: 0–25
Threshold Level: 0–25
Threshold Pitch: 0–25
Target Identification: 50 segment notch discrimination | Ferrous: -9 – 0 | Non-ferrous: 1 – 40
Target Tones: 1, 2, 5, 50
Tone Break: Ferrous | Non-ferrous
Tone Pitch: Ferrous | Non-ferrous
Tone Volume: Ferrous | Non-ferrous
Depth Indicator: 5 levels
Length: 1440 mm (56.7″)
Weight: 1.34 kg (2.96 lbs)
Standard Coil: 11-inch Double-D Smart coil with skidplate (waterproof to 3m/10′)
Audio Output: • In-built loudspeaker • 3.5mm (1/8″) headphones (included) • Bluetooth compatible • WM 08 Wi-Stream compatible
Headphones (included): Bluetooth and aptX™ Low Latency headphones (non waterproof)
WM 08 (included): Yes
Display: Monochrome LCD with backlight
LCD Backlight: Low | Medium | High | Off
Battery: In-built rechargeable Lithium-ion battery
Battery Runtime: Approx. 12 hours
Waterproof: Waterproof to 3m/10-feet
Key Technologies: Multi-IQ | 5F×8 | Wi-Stream | Bluetooth | aptX™ Low Latency
Other Accessories: USB Charging cable (1.5A), Multi Language Screen protectors
Software Upgradeable: Yes, via USB connection (Windows and OSX)
Warranty: 3 years control box and coil

Part# 3720-0002

UPC 811493016702

Minelab Equinox 800 Manual

Minelab Equinox 800 Getting Started Guide

Features:

Why Minelab Multi-IQ? Because with Minelab’s revolutionary Multi-IQ technology, you’ve got the combined power of multiple detectors in one — all working for you at the same time. Nothing goes undiscovered and no terrain is off limits. Silver, gold or jewellery. Park, field, or beach. Unearth the power of EQUINOX powered by Multi-IQ.

Recovery Speed and Iron Bias controls how your detector responds to multiple signals: from minimising your chances of digging iron to sniffing out gold and treasures hiding within the trashiest ground and everything in between.

With IP68 waterproof capability to 5 m (16 ft), take EQUINOX anywhere and own the ground beneath your feet.

Comprising lightweight 3-piece carbon-fibre shafts, EQUINOX 900 weighs only 1.2 kg (2.8 lb) and packs down to a mere 61 cm (24 in) — throw it in your backpack, and you’re all set.

With multiple tone audio options, the sound of treasure and gold has never been clearer — EQUINOX’s superior audio means you’ll not only ‘hear’ if a target is trash or treasure but you’ll also be able to gauge its size and depth simply by listening.

The daylight may have ended, but that doesn’t mean your hunt has to — with Control Pod Flashlight, Red Backlight Display, Backlit Keypad, and Handgrip Vibration you can power on long after the sun has gone.

For those with a specific goal in mind, EQUINOX® delivers total control and the power to choose from six single frequencies: 4/5/10/15/20/40 kHz.

Whether you’re swinging in the goldfields or snorkelling at the beach, EQUINOX 900 has no limits and dominates all targets and all terrains.

The EQUINOX Multi-IQ engine delivers Stable IDs for even the deepest targets. Depend on solid, stable information to tell you whether to dig in or move on — when you’ve got a target, switch to Pinpoint Mode to zero-in further.

Specifications
Search Modes: Park, Field, Beach, Gold
All-Metal Shortcut: Yes
Custom Search Profiles: 8
User Profile Button: Yes
Operating Frequencies (kHz): Multi, 4, 5, 10, 15, 20, 40
Noise Cancel: Auto (19 Channels), Manual
Ground Balance: Auto, Manual, Tracking
Sensitivity: 1 to 28
Target Volume: 0 to 25
Threshold Level: 0 to 25
Threshold Pitch: 0 to 25
Target Identification (TID): 119 segment notch discrimination: Ferrous: -19 to 0 I Non-ferrous: 1 to 99
Target Tones: 1,2, 5, All Tones (At), Depth (dP)
Tone Break: Ferrous, Non-ferrous (t1, t2, t3, t4)
Tone Pitch: All tones adjustable: 0 to 25
Tone Volume: All tones adjustable: 0 to 25
Recovery Speed: 1 to 8
Iron Bias: 0 to 9
Depth Indicator: 5 levels
Discrimination Segments: 119 segments
Pinpoint Mode: Yes
Wireless Audio: Yes
Length (approx.): Collapsed: 61 cm (24 in) – Extended: 144 cm (56.7 in)
Weight: 1.27 kg (2.8 lbs)
Display: Monochrome LCD
Display and Keypad Backlight (red): Off, High, Medium, Low
Flashlight: On, Off
Vibration: On, Off per Tone Region
Supplied Coil: EQX11 11″ Double-D coil with skid plate, EQX06 6″ Coil with skid plate
Audio Output: In-built loudspeaker, Wired 3.5 mm (1/8″) headphones, Wireless headphones
Supplied Headphones: Minelab ML 85 Low Latency wireless headphones
Battery: 3.7V/5100 mAh Internal Lithium-lon battery
Additional Included Accessories: Getting Started Guide, Screen Protector (English), Charging Cable
Waterproof: 5m (16 ft) IP68
Operating Temperature Range: -10 to +40 degrees celcius (+14 to +104 degrees fahrenheit)
Storage Temperature Range: -20 to +70 degrees celcius (-40 to +158 degrees fahrenheit)
Key Technologies: Multi-IQ

Part# 3720-0006

UPC 811493017723

Application: High quality headphones are available to provide you with the ability to hear faint, deep treasure with crisp clear sound. Headphones provide full ear coverage effectively blocking external noise, such as wind, traffic, other detectors, etc.

Can also be connected to a WM 08 Wireless Audio Module (NOTE the WM 08 is not waterproof!)

Connection: 1/8 inch jack.

Model# 3011-0372

UPC 811493016757

Up until now, there has always been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.

When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.

An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery!

Key Technology: Ultra-wide dynamic range 45kHz VLF
Detect Modes: Gold (Iron reject), Deep All-Metal
Discrimination: Gold Chance Indicator (high/low)
Ground Balance: Automatic (Easy-Trak)
Noise Cancel: Automatic (On start-up)
Sensitivity Adjust: Manual (1–10), Auto (11), Auto+ (12)
Volume Adjust: Manual 1–6
Visual Display: Monochrome LCD
Detector Length: 1382mm–944mm (54.4″–37.2″)
Detector Weight: (with10″ × 6″ coil) 1.33kg (2.94lbs) (excluding battery)
Audio Output: Internal speaker or headphones 3.5mm (1/8″)
Coils (standard): GM 10 (10″ x 6″ Double-D), GM 05 (5″ Double‑D)
Waterproof/Splashproof: Coils waterproof to 1m (3′), Control box rain/splash-proof
Battery options: Li-Ion (included), 8 × AA Batteries (not included)
Warranty: 2 years control box & coil

Model Number: 3317-0001

UPC 811493016443

Minelab Gold Monster 1000 Metal Detector Manual

Features:

MPS, DVT & SETA technologies for superior gold detecting performance.

2 coils supplied: 11-inch Double-D for general use AND 11″ Monoloop for deeper detecting

Versatile Timing settings for various ground conditions. The Enhance timing is a powerful feature, similar to the Sensitive Smooth timing, but provides an improvement in the depth and signal response on small and large targets alike. The Sharp timing is more suited to quieter soils and can also help to pinpoint faint targets.

Six pre-programmed search modes for easy switch-on-and-go detecting. All six search modes can be modified with your favourite settings and renamed.

Stabilizer control for the smoothest threshold. In noisy conditions, turning it down will provide you with a smoother threshold. In quiet conditions, increase the stabilizer and faint target signals will be more obvious.

Ground Balance OFF for neutral soils. This is a useful feature for very benign low mineralised or salt saturated soils. This setting will also work well for treasure or relic hunters in loam or sandy soils.

Backlight with adjustable time-out to preserve battery life.

Target Volume allows you to increase the strength of softer target signals. This is useful in windy conditions, for people suffering from hearing loss, and to adjust the audio volume when using external speakers. This can also provide an audio boost in mild soils, and can be used to smooth out ground noise signals in highly mineralised soils.

The Iron Reject function allows you to set the desired level of discrimination, from cautious to aggressive. This enables detecting in areas with high levels of ferrous junk.

Built-in amplifier so you can hear soft target signals from deeper nuggets, more easily. The Li-lon battery pack includes a built-in audio amplifier, allowing you to use an external speaker without the need for any external booster.

Specifications:

Application: Gold Prospecting & Deep Relic
Technology: MPS, DVT & SETA
Frequency/Transmission: Bi-Level, Advanced Pulse Induction
Coil: (standard) 11″ Double-D AND 11″ Monoloop
Audio Output: 6.35mm (1/4″) headphone/speaker jack.
Headphones Supplied: Koss 100 ohm headphones.
Visual Display: LCD screen 64×128 pixels, transflective.
Backlight: Yes with adjustable automatic ‘time-out’.
Product ID: 1645
USB Connectivity: –
Memory: Setting changes saved automatically and remain until changed or reset. Factory Presets can be restored on start-up.
Depth Indication: –
Detect Modes: General, Deep & Custom. Custom Modes are: Hi Mineral, Hi Trash, Patch & Test A.
Discrimination: Iron Reject: range 1 to 10 & All Metal.
Timings: Enhance, Normal, Sensitive Smooth, Salt Course, Sensitive Extra & Sharp.
Audio Tone: Variable Control 1 to 100.
Audio Type: Quiet, Normal, Deep & Boost.
Ground Balance: Automatic Ground Balance, Fixed & Tracking: Slow, Medium & Fast.
Ground Balance Type: General, Specific & Ground Balance Off.
Trash Density: –
Pinpoint: Quick-Trak button.
Sensitivity Adjust: Rx Gain 1 to 15.
Tune / Noise Cancel: Automatic & Manual 0 to 255.
Threshold: Adjustable turn control.
Target Volume Adjust: Volume Limit 1 to 20.
Battery: Lithium-Ion with built-in amplifier (up to 12 hrs). Supplied with mains and vehicle charger.
Low Battery Alert: Audio alert.
Length: 1100mm – 1300mm (43.3″ – 51.2″).
Weight: 2.4kg (5.3lbs) (ex. battery).
Warranty: 3 years control box & coil.

Part# 3300-0015

UPC 811493016368

Minelab GPX 4500 Manual

The GPX Series has created new gold rushes around the world as these detectors find gold much deeper than most other detectors, in ALL ground conditions. The GPX 5000 is one of the most advanced gold prospecting detector and sets a new benchmark in gold detecting technology. The state-of-the-art technologies and an incredible eight Soil / Timings (Timings) enable this high performance detector to see through even the toughest ground to find gold of any size at unbelievable depths. Besides the patented MPS, DVT and SETA technologies and legendary GPX ability, this unbeatable detector also features 6 preset search modes, a Boost Audio function and comes with two coils as standard to guarantee successful prospecting.

Product Features: The GPX 5000 has all of the features and functions of the GPX 4500 as standard plus additional functionality providing: Superior GOLD prospecting performance 8 Soil/Timings is like having 8 detectors in 1, find more gold in ALL ground conditions Fine Gold Timing gives even more depth and sensitivity than Enhance – bring home more nuggets even from ground thought to be completely worked out! Salt/Gold Timing improved performance on both large and small nuggets in salty mineralized ground 6 factory preset Search Modes for ‘switch on and go’ simplicity for everyone Increased Rx Gain adjustment allowing more precise sensitivity control and better performance 2 coils: 11-inch Double-D coil plus 15-inch X 12-inch Monoloop coil as standard Increased Stablizer adjustment level Improved target response settings

UPC 811493016351

Features:

GeoSense-PI™ technology quickly and precisely analyses gold signals buried in the ground, so you’ll be able to hear all gold pieces clearly.

Small fragments to large nuggets and everything in between can be accurately located with this one detector.

With automatic features and an easy-to-use interface, you’ll be an expert at finding gold from the moment you turn on your GPX 6000. Because Automatic Ground Balance continuously adapts to changing soil conditions as you swing your detector over the ground, there’s no need to adjust any settings. Finding gold has never been easier.

Become an Easy Expert with our GPX 6000™ Learn modules. These short videos will help you learn how to operate the GPX 6000 gold detector.

Weighs only 2.1 kg (4.6 lb), featuring light carbon fibre shafts, streamlined control box, and signature U-Flex™ armrest so you can detect for longer and feel comfortable doing it.

Tested in the harsh environments of the Australian outback, Africa and the Middle East, the GPX 6000 can withstand extreme heat and heavy rains. A 3-year warranty is included, backed by Minelab’s global support.

Coil options include a versatile 11″ Monoloop coil for tight spaces and pinpointing tiny gold pieces, a 14″ Double-D coil to detect gold accurately even in salty environments, and a 17″ Monoloop coil to search areas faster and find big nuggets. All coils are waterproof to 1 m (3.3′).

Whether listening with the loud and clear external speaker or the supplied wireless Bluetooth® headphones, you’ll never miss out on the sound of gold.

GeoSense-PI™ technology analyses and responds to ground signals with great clarity and precision, so you can detect in difficult environments once thought undetectable.

It rapidly suppresses unwanted signals via three overlapping feedback systems for superfast detection of even the tiniest gold pieces.

Powered by GeoSense™ technology, the GPX 6000® is in tune with you and the earth.

Specifications
Search Modes (Ground Types): Difficult (default) | Normal
Double-D Modes: EMI Cancel (default) | Conductive Ground Cancel
Ground Balance: Auto | Manual (Quick-Trak)
Noise Cancel: Automatic (on start-up) | Manual (as needed – 5s duration)
Sensitivity: Manual (levels 1 — 10) | Auto (level 11) | Auto+ (Level 12)
Threshold Tone: On, Off
Volume: 5 Levels
Length: Extended: 155 cm (61 in) | Collapsed: 67 cm (26.5 in)
Weight: 2.1 kg (4.6 lb) (with 11″ round Monoloop coil)
Display: Monchrome LCD with backlight
Available coils: GPX 11™ 11″ round Monoloop | GPX 14™ 14″ round Double-D | GPX 17™ 17″x13″ elliptical Monoloop
Audio Output: Built-in loudspeaker | Wired 3.5 mm (1/8″ headphones) | Bluetooth wireless audio (aptX™ Low Latency)
Supplied Headphones: ML 100 wireless headphones
Supplied Batteries: Rechargeable Lithium-Ion battery 5833 mAh
Battery Runtime: 8 hours (approximately)
Waterproof: Coils: submersible to 1m (3.3 ft) | Detector: splash / rain proof
Operating Frequency: 1.225 kHz
Operating Temperature Range: -10°C to +50°C (+14°F to +122°F)
Storage Temperature Range: -20°C to 70°C (-4°F to 158°F)
Key Technologies: GeoSense-PI™ | Bluetooth | aptX™ Low Latency

Part# 3300-0500

UPC 811493017570

Minelab GPX6000 Metal Detector Manual

Application: High quality headphones are available to provide you with the ability to hear faint, deep treasure with crisp clear sound. Headphones provide full ear coverage effectively blocking external noise, such as wind, traffic, other detectors, etc.

Fits X-TERRA 705 Gold Pack, X-TERRA 705, X-TERRA 505, X-TERRA 305, Safari, Explorer SE Pro, E-TRAC, Eureka Gold, GPX 5000, GPX 4800, GPX-4500.

100 ohm 6.35mm (1/4 inch) jack.

UPC 811493013954

Features:

Multi-IQ+ is the newest generation Simultaneous Multi-Frequency engine from Minelab, building on the success of the original Multi-IQ. Multi-IQ+ transmits more power through the coil at a wider range of operating frequencies, to light up more targets in the ground. It has completely revamped signal processing providing enhanced discrimination, greater Target ID resolution, improved target separation, and gives you a greater ability to tune discrimination and audio to suit your detecting conditions.

Find desired targets amongst ferrous trash like no other detector on the market with MANTICORE’s exceptional target separation performance.

Exceeding expectations with every swing, MANTICORE delivers improved Target ID stability and close target separation. With customizable Ferrous Limits you have unprecedented control to accept ferrous coins, reject complex ferrous targets, or dial in maximum target unmasking in iron.

1.3 kg / 2.9 lb with an extended length of 1440 mm / 56.7 and a collapsible length of 630 mm / 24.8 inch.

MANTICORE delivers 10 customizable Search Modes including All-Terrain optimised for inland detecting; Beach optimised for sand, surf and seawater zones; and Goldfield optimised for detecting gold nuggets.

Take control of audio with MANTICORE. Hear target information the way you like it via superior audio controls including customisable target tones, suppression of Electromagnetic Interference (EMI) chatter and Continuous Pitch (VCO) audio with ferrous tones and genuine threshold detection tone.

No terrain is off limits with MANTICORE — dive up to 5 m (16 ft) for underwater exploration (IP68 Rating) to find hidden targets others can’t reach.

Having cutting-edge technology inside our Minelab machines is only half the story. Making MANTICORE’s power easy to access is equally as important. That’s why MANTICORE features a large colour screen and delivers the most intuitive user experience ever found on a detector.

There may be a storm raging outside but inside MANTICORE it’s quiet and calm. Improved EMI rejection means it’s possible to operate using higher sensitivity whilst isolating target information — even in the most challenging environmental conditions.

The daylight may have ended, but that doesn’t mean your hunt has to. With Control Pod Flashlight, Display Backlight with Auto Adjust, and Backlit Keypad, plus Handgrip Vibration, you can power on long after the sun has gone.

MULTI IQ+: Minelab’s revolutionary technology has 50% more power than traditional models and is the highest-powered simultaneous multi-frequency machine on the market.

FAST RESPONSE: Identify your targets quickly and confidently to efficiently sort between trash and treasure with exceptional target separation performance.

POWERFUL 2D ID MAP: Identify your targets with greater visual and audible target insights.

ENHANCED DISCRIMINATION: Exceptionally accurate target ID allows you to accept or reject finds quickly and confidently.

WIRELESS AUDIO: Clearly detect with audio controls set specifically for you in order to identify targets confidently, reduce noise and identify trash.

ULTIMATE SEARCH MODES: Over 10+ preset search modes allow you to set the stage for success, with the ability to customize up to 10 unique modes tailored to your specific needs.

UNRIVALLED CONSTRUCTION & WATERPROOF: Powerful yet lightweight, Manticore weighs only 1.3 kg (2.9 lbs.) and includes a three-piece, compact Carbon-Fibre shaft system. Waterproof up to 16 ft (5 m).

INTUITIVE CONTROL: The large LCD panel allows for easy viewing and clear navigation control.

BOOSTED EMI IMMUNITY: In challenging environments, improved EMI rejection uses higher sensitivity to isolate targets.

CHOICE OF COILS: Comes with the M11 (11″ Round Double-D coil) and choose from
M8 (8″x5.5″ Elliptical Double-D) and M15 (15″x12″ Elliptical Double-D) coils.

LIGHTING & VIBRATION: Detect even when the sun goes down with features such as Control Box Flashlight, Display Backlight with Auto Adjust, Backlit Keypad and Handgrip Vibration.

CLEAR AUDIO: Built in external speaker allows for crystal-clear audio and comes with Low Latency Wireless Headphones.

BUILT TO LAST: A three-year warranty with software upgrade capability allows detection far into the future.

Specifications
Detect Modes (Customizable): All-Terrain (5), Beach (4), Goldfield (1)
Operating Frequencies: Multi-IQ+, 5 kHz, 10 kHz, 15 kHz, 20 kHz, 40 kHz
Noise Cancel: Auto, Continuous Auto, Manual (-9 to +9)
Ground Balance: Auto, Manual, Tracking
Sensitivity: 1 to 35
Target Identification: Conductive: 0-99 with ferrous indication
2D ID Map: Two-Dimensional ID Map System with Target Trace
Target Tones: 1, 2, 5 – Tone | 1, 2, 5 – Region All Tones
Target Volume: 0 to 25
Target Pitch: 1 to 50
Ferrous Volume: 0 to 25
Ferrous Pitch: 1 to 50
Audio Themes: Normal, Enhanced, Depth, Prospecting
Volume Profiles: Simple, Medium, Rich
Threshold Level: 0 to 25
Threshold Pitch: 1 to 50
Recovery Speed: 0 to 8
Ferrous Limits: Upper: 0 to 14 | Lower: 0 to 9
Ferrous Limits Custom: 1 to 4
Shortcuts: Soft Keys: 2 (Action Bar), 1 (User Button)
Depth Indicator: 5 levels
Shaft System: 3-piece highly collapsible carbon-fibre
Extended Length: 1440 mm / 56.7 inch
Collapsed Length: 630 mm / 24.8 inch
Weight: 1.3 kg / 2.9 lb
Standard Coil (M11): 11-inch round Double-D coil with skidplate (waterproof to 5 m / 16 ft)
Audio Output: Speaker | 3.5 mm (1/8″) headphones | Wireless low latency headphones
Headphones (Included): Minelab ML-105 wireless low latency headphones (non waterproof)
Display: Color LCD
Display Backlight: Manual (1 to 10), Auto Adjust
Keypad Backlight: On, Off
Flashlight: Low, Medium, High, Off
Handgrip Vibration: On, Off
Battery: Internal rechargeable Lithium-ion battery
Battery Run Time: Approx. 10 hours
Battery Charge Time: Approx. 7 hours
Waterproof: Waterproof to 5 m / 16 ft, IP68
Key Technologies: Multi-IQ+ (High Power Simultaneous Multi-Frequency)
Included Accessories: USB Charging Cable, 5x Screen Protectors, 3.5 mm Headphone Audio Cable, Headphone Case
Software Upgradable: Yes, via USB connection (Windows or Mac OS compatible)

Part# 3228-0200

UPC 811493017426

PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time.

Features:

Splash proof design: Rugged, splash proof design for rainy conditions. The perfect companion for a waterproof detector.

Audio indication: Audio tones intensify as the probe approaches the target, making target location easier than ever.

High visibility – with lost-alarm: The PRO-FIND’s bright yellow handgrip is clearly visible for easy location, so you won’t leave it behind after you dig. Quickly locate your forgotten pinpointer with the handy lost-alarm.

Holster included: Semi-rigid holster that attaches to most belts will keep your PRO-FIND at the ready.

Probe side sensitivity: Probe side detection area (360 degrees) allows targets to easily be located in the walls of the hole.

Auto power off: To save battery life, the PRO-FIND 15 switches off after eight minutes of inactivity.

VLF Technology: VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.

Detector Interference Free technology: The advanced design of the PRO-FIND 15 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field.

Specification
Target Identification: No
Sensitivity: Fixed
Waterproof: Splash proof only
Audio Indication: On only
Vibration indication: No
LED Flashlight: No
Battery: 9V PP3 (not included)
Battery Life: 30 hours nominal
Length: 237 mm (9.3″)
Weight: 193 g (6.82 oz)
Accessories: Holster

Part# 3226-0002

UPC 811493016399

Minelab Pro-Find 15 Manual

PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time.

Features:

Ferrous Tone ID: Two different responses help you to identify ferrous junk from nonferrous treasure. Great to use with non-discriminating detectors.

Waterproof to 3 m (10-ft): Rugged waterproof design ideal for beach and river pinpointing. The perfect companion for a waterproof detector.

Audio & vibration indication: Audio tones and vibration intensify as the probe approaches the target making target recovery easier, especially underwater!

Adjustable sensitivity: Five sensitivity levels allow you to precisely adjust for maximum depth and minimum noise in all ground conditions. Easily adjustable with separate +/– buttons.

High visibility – with lost-alarm: The PRO-FIND’s bright yellow handgrip is clearly visible for easy location, so you won’t leave it behind after you dig. Quickly locate your forgotten pinpointer with the handy lost-alarm.

Holster & lanyard included: A lanyard and a tough, semi-rigid holster that attaches to most belts will keep your PRO-FIND at the ready.

Probe side sensitivity: Probe side detection area (360 degrees) allows targets to easily be located in the walls of the hole.

Auto power off: To save battery life, the PRO-FIND 35 switches off after eight minutes of inactivity.

LED flash light: Easily see targets when pinpointing in low light conditions and in deep holes.

VLF Technology: VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.

Detector Interference Free technology: The advanced design of the PRO-FIND 35 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field.

Specification
Target Identification: Ferrous Tone ID
Sensitivity: Adjustable (5 levels)
Waterproof: Waterproof to 3 m (10-ft)
Audio Indication: On, Off
Vibration indication: Yes
LED flashlight: Yes
Battery: 9V PP3 (included)
Battery life: 30 hours nominal
Length: 237 mm (9.3″)
Weight: 193 g (6.82 oz)
Accessories: Holster, Lanyard

Part# 3226-0003

UPC 811493016405

Minelab Pro-Find 35 Manual

The PRO‑SONIC wireless audio system generates audio using advanced wireless technology to achieve clear sound with minimal perceivable time delay.

The PRO‑SONIC Receive Module features an internal loudspeaker and a 6.35mm (¼”) headphone socket for use with your choice of headphones. It can be attached to your harness or clothing using the metal belt clip.

The PRO-SONIC Transmit Module sends out low-power (mW) radio waves using the ISM frequency band (2.402 – 2.480Ghz). The PRO-SONIC Receive Module senses these signals and establishes a piconet communication network with the Transmit Module, using frequency hopping to eliminate interference from other wireless devices.

The PRO-SONIC system contains everything you need for clear, fast, wireless audio.

PRO-SONIC is compatible with most detectors, and comes with an SDC adapter cable and a handy car charger for charging on the go.

Receive and Transmit modules
Universal Charger (AC and car charger)
SDC 2300 adapter cable
Transmit Module Audio Cable (6.35mm/1/4-inch)
Dual Charging Cable (1 × USB-A, 2 × USB Micro-B)
Getting Started Guide

UPC 811493016221

Minelab PRO-SONIC Headphone Wireless System Manual

Product: SDC 2300
Application: Gold Prospecting (waterproof 10ft)
Technology: MPF
Frequency/Transmission: Pulse Induction, Multi Period Fast (MPF)
Coil (standard): 8″ Monoloop
Audio Output: Built-in speaker & Koss waterproof headphones (not supplied)
Headphones Supplied: Minelab headphones (supplied)
Visual Display: LED lights
Detect Modes: Normal (1-5 Sensitivity range) & Salt (1-3 Sensitivity range)
Audio tone: Low, High
Ground Balance: Automatic Ground Tracking (AGT) Fast Ground Balance
Ground Balance Type: Automatic Ground Tracking (AGT) Fast Ground Balance
Sensitivity Adjust: Normal (1-5 Sensitivity range) & Salt (1-3 Sensitivity range)
Tune / Noise Cancel: Automatic scanning
Threshold: 9 audio levels
Battery: Li-on Battery Pack with Charger, 4 x C-cell 1.2V 5000mAh Rechargeable (not supplied), 1.5V Alkaline (not supplied)
Low battery alert: visual LED indicator
Length: Extended: 1500mm (59.1″) Collapsed: 400mm (15.7”)
Weight: 2.3kg (5.1lbs)
Warranty: 3 years control box & coil

Part Number: 3230-0003

UPC  811493014777

MInelab SDC 2300 Manual

SIMULTANEOUS MULTI-FREQUENCY

Why Multi-IQ? Because with Minelab’s revolutionary Multi-IQ technology, you’ve got the combined power of multiple detectors in one — all working for you at the same time. Simply turn on and go. Nothing goes undetected and no terain is off limits. Silver gold or jewellery. Park, field or beach. Unearth the power of VANQUISH with Multi-IQ.

ALL-TERRAIN

No matter what you seek, VANQUISH has you covered. Simply select one of the four Find Modes — Coin, Relic, Jewellery, or All Metal — then start swinging. Each mode is pre-programmed and optimised to give you the best performance, anytime and anywhere: park, field or beach. You can even save your favourite settings to a custom Find Mode.

VANQUISH welcomes tough terrain. It dominates at the beach in wet sand and salt water, outperforming other detectors that can’t compete. 25 discrimination segments deliver ultimate control over what metals you want to accept or reject.

VANQUISH 540 PRO-PACK TECH SPECS
Search Modes: Coin, Relic, Jewellery, Custom, All Metal
Custom User Search Profile: Yes
Operating Frequencies (kHz): Multi-IQ
Noise Cancel: Auto (19 Channels)
Bluetooth Audio: Yes
Iron Bias: High (default), Low
Sensitivity: 10 levels
Volume: 10 levels
Target Tones: 5 tones
Discrimination Segments: 25 segments
Target ID’s: -9 to 40
Depth Indicator: 5 levels
Length: Extended: 1450mm (57″), Collapsed: 760mm (30″)
Weight (incl. batteries): 2.9lbs (1.3kg)
Standard Coil: V12 12″x9″ Double-D, V8 8″x5″ Double-D
Audio Output: In-built loudspeaker, 3.5mm (1/8″) headphones, Bluetooth wireless headphones
Supplied Headphones: Bluetooth wireless headphones
Display: Monochrome LCD with red backlight
Supplied Batteries: 4 x AA NiMH rechargeable
Waterproof: Coil to 1m/3-feet
Operating Temperature Range: -10°C to +40°C (+14°F to +104°F)
Storage Temperature Range: -20°C to +70°C (-4°F to +158°F)
Key Technologies: Multi-IQ, Bluetooth, aptx™ Low Latency

Part# 3820-0004

UPC 811493017334

Minelab Vanquish 540 Pro-Pack Manual

Minelab Vanquish 540 Pro-Pack Getting Started Guide

The X-TERRA 305 is the solid no-nonsense introduction to the new generation Minelab X-TERRA Series. A lightweight, easy to use, coin and treasure-hunting detector designed for the hobbyist who does not want or need the top of the range machine. The X-TERRA 305 is suitable for the whole family and there is even a short shaft available for keen youngsters. Despite being ultra lightweight and so easy to use there is no compromise on quality or performance – Minelab’s designers used innovative, lateral thinking and the very latest in digital components to design the X-TERRA Series of detectors. The X-TERRA 305 is now packed with new features, functionality and enhanced setting options. This detector delivers results, value and more…in fact some might think that we made it too good!!! A no nonsense detector perfect for those seeking a high performance entry-level detector.

Features:

Minelab’s proprietary True Digital VFLEX technology, then new class of single frequency detectors – you can change the operating frequency simply by changing coils. Compatible with Medium Frequency (7kHz) and High Frequency (18.75kHz) coils – 6 accessory coil options offer increased versatility.

Accurate Ground Balance capability with manual adjustment of 0-20, allows the user to adjust to ground mineralization easily. 2 preset patterns, that can also be customised, plus All-Metal mode. Choice of 1,2 or 3 tone ID’s plus multi-tone Target ID (12) response. This allows greater flexibility in deciding how target signals are represented.

Threshold adjustment, with a range of -5 to 25 allowing the user to set threshold to levels where slight variations from either very small shallow, or very large deep, targets can be noticed.

Noise Cancel function with 3 manual settings allowing the user to pick the quietest channel for detecting.

Rapid recovery Pin-Point with variable tone and graphical indicator.

Target Volume adjust (0-10) allowing you to get more definitive audio information on each target.

Depth indicator, updates continuously, even in Pinpoint mode.

Positive reflective LCD display.

Runs on just 4 x AA batteries.

Ultra lightweight, balanced design (only 1.3kgs).

Minelab does NOT include the short shaft anymore as described in the video below.

UPC 811493012940

The X-TERRA 705 Gold Pack is a versatile gold detector featuring innovative VFLEX technology and an accurate preset Prospecting Mode making it the obvious choice for an entry level gold detector. The small, robust 18.75 kHz Double-D Elliptical coil is unrivalled at finding small gold nuggets. Its ability to find different sized gold at different depths is as simple as changing to other 18.75 kHz high frequency coil sizes. The X-TERRA 705 Gold Pack is designed for quick assembly, efficient mobility and features a lightweight, balanced frame allowing you to detect for longer. The X-TERRA 705 Gold Pack performs efficiently on four standard AA batteries.

Product Features

Entry-level GOLD prospecting detector

18.75 kHz Double-D Elliptical coil, ideal for small gold

Uses innovative VFLEX technology Automatic ground balance

– reduces false signals Iron Mask discrimination

– dig less trash

Retains last used settings allowing instant detecting on next start-up

Precise Pinpoint function for faster target recovery

Lightweight, ergonomic and easy to use 4 x AA standard batteries

In-built speaker or optional headphones

Alternative coil options available including 6-inch waterproof and 10.5-inch water resistant 18.75 kHz coils

Quick Start Guide is available

UPC 811493012971